What is the difference between ordinary lathe processing and numerical control lathe processing

Among the numerous mechanical processing equipment, the ordinary lathe processing is also one of the mechanical processing equipment which has lasted the longest and has not been eliminated. The main reason why the ordinary lathe processing can not be eliminated is that the equipment is simple in operation and strong in rigidity. Compared with the CNC lathe, it still has certain advantages in some aspects.

The ordinary lathe is easy to operate. It is to adjust the speed, shift gears, lift the starting lever, and then push the control lever forward. When the turning tool is pulled back, the turning tool will move backward. To the left, the turning tool will turn to the left and the same to the right. Many beginners can learn in a short period of time, and then carry out ordinary lathe processing. It will take several years or even longer to make the operation skilled and operate freely, or to process the workpiece to a certain accuracy level.

CNC lathe processing is much more complex than ordinary lathe, CNC lathe refers to the purpose of controlling machine tool through numerical control program, so as to carry out batch automatic processing operation, and has high precision, better efficiency in production, and also has the advantages of low labor intensity and high degree of automation. The following is the difference between ordinary lathe processing and numerical control lathe processing

1. The screw rod of trapezoidal thread is used in the ordinary lathe to process the thread, and the smooth rod is used for cutting and other processing technology. When CNC lathe is processing thread, the ball screw is usually used.

2. In terms of guide rail, the two lathes are also different. The rails of ordinary lathe are hard rails, while CNC lathes are wired rails in addition to hard rails.

3. In terms of motor configuration, there are big differences between the two lathes. The spindle motor of ordinary lathe can use ordinary motor, but if it is CNC lathe, the servo motor is usually used.

4. In addition, general lathe is not digital control operation, but CNC Lathe will have.

Wally machinery technology is engaged in CNC lathe processing business, which can meet the needs of ordinary lathe processing. The maximum machining diameter of spare parts can be up to 300 mm. With CNC machining center, it can complete the precision processing service of large products.